Steps of installation

1. Before installing the HID system, we advise our customer to consult your local agent or professionals to make sure the correct
    type of HID system for your vehicle and any safety issue need to take into consideration for smooth installation process.

2. Open the head-light, take the bulb of original lamp stand off and change HID bulb, confirm keeping in touch well.

3. Expand the line hole of rubber protecting the wire, draw bulb line bunch of HID, notice the cable and bulb lead wire cannot
    connect together, confirm that waterproof circle and rubber cover are pressurized.

4. Connect ballast output end fixed firmly on car with bulb, headlight lamps connect ballast input end of 12V direct current with
    supplying power-end well.

5. Check all installation steps, confirm install correctly before mobilizing vehicle and turning on the headlight.

6. Check and adjust light beam, height, distance and figure that headlight shoots, any local regulation requirement on these
    should be followed.

1. While installing the ballast, must install firmly and it must be far away from high-temperature engine and position not easy to
    expose to water.

2. Voltage of storage battery of vehicle of must be in normal working range, otherwise can lead to the fact the bulb glimmers,
    the lighting result is unsatisfactory, even cannot light the headlight.

3. While installing this system, please contact professional consultants and comply with relating local government regulations.
    Our company does not bear the any responsibility on inappropriate use of our products.